Gusto nyo po ba gumawa ng
Bootable XP cd para pang
format ng pc nyo at ang meron lang kayo na file is
yung nadownload nyo from the Internet o Kaya gagawa kayo ng second copy ng XP cd nyo?
Well heto na po ang tutorial para jan.
What you need:
=
XP Files (downloaded fronm the internet o kaya copied from CD)
=
Nero Burning Rom ( makikita nyo po sa thread ko
http://www.symbianize.com/showthread.php?t=110273)
=
Boot Image (attach on this thread)
Procedure:
Gawa po kayo ng
OS folder kahit saang drive nyo gusto.Sa example ko po I used Drive C:
SA loob ng OS Folder nyo gawa kayo ng 2 Folder.Name nyo yung isa
BOOT at ung isa naman
ROOTCopy nyo po LAHAT ng files ng XP sa ROOT Folder
Copy nyo naman po yung Boot Image na naka attach sa thread na to sa
BOOT Folder (Importante tong file na to para mag boot ung CD Nyo)
Using NERO Burning ROMStart Nero Burning ROM
Select FILE > NEW from the menu
1.) Select CD-ROM (Boot).
2.) Select Image file from Source of boot image data.
3.) Check Enable expert settings (for advanced users only!).
4.) Set Kind of emulation: to No Emulation.
5.) Set Load segment of sectors (hex!): to 0000.
6.) Set Number of loaded sectors: to 4.
7.) Set Platform identifier: to Intel x86 compatible.
8.) Press the Browse... button.
Locate the BootSector file (boot.ima) in the folder C:\OS\BOOT.
Click the Open button.
Click on the ISO tab.
- Set File name length to Max. of 31 chars (ISO Level 2).
- Set Format to Mode 1.
- Set Character Set to ISO 9660 (standard ISO CD-ROM).
- Check the Joliet check box.
- Check all Relax ISO Restrictions.
- Check Allow more than 64 characters for Joliet names.
Click on the Label tab.
Remove the check from Also use the ISO 9660 text for Joliet.
Enter the Volume Label into the ISO 9660 and Joliet text boxes.
Click the More fields button.
Enter in the Volume Label into the System Identifier, Volume Set, Publisher,
Data preparer, Application text boxes under ISO 9660 and Joliet.
Click the OK button.
Click the Burn tab.
- Check Write.
- Check Finalize CD (No further writing possible!).
- Write Speed (The lower the better recomended 16x)
- Set Write Method to Disc-at-once. (o kaya naman ay Track-at-Once)
- Click the New button.
Locate the folder C:\OS\ROOT.
- Select everything in the folder and drag it to the ISO compilation panel.
Note: Some files are not show in the following image.
- Click the Write CD Dialog button.
Click the Boot tab.
- Verify the settings. Correct if needed.
- Click the Burn button.
Wait nyo nalang po ma complete.
Click the OK button.
Click the Done button.
- Quote :
boot.rar (1.04 KB)
http://www.mediafire.com/?gyqmnn3njwd